Advances on Mechanics Design Engineering and Manufacturing III

This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2–4, 2020.

DOWNLOAD NOW »

Author: Lionel Roucoules

Publisher: Springer Nature

ISBN: 9783030705664

Category: Technology & Engineering

Page: 439

View: 405

This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2–4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Advances on Mechanics Design Engineering and Manufacturing

This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy.

DOWNLOAD NOW »

Author: Benoit Eynard

Publisher: Springer

ISBN: 3319457802

Category: Technology & Engineering

Page: 1245

View: 903

This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Advances on Mechanics Design Engineering and Manufacturing II

This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain.

DOWNLOAD NOW »

Author: Francisco Cavas-Martínez

Publisher: Springer

ISBN: 9783030123468

Category: Technology & Engineering

Page: 824

View: 773

This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Advances on Mechanics Design Engineering and Manufacturing

Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), ... Meshing angles evaluation of silent chain drive by numerical analysis and experimental test, Meccanica, 51(3), ...

DOWNLOAD NOW »

Author: Benoit Eynard

Publisher: Springer

ISBN: 9783319457819

Category: Technology & Engineering

Page: 1245

View: 857

This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Current Advances in Mechanical Design and Production VII

The first of these conferences was held in 1979. The seventh, and most recent, conference in the series was held in Cairo during February 15-17, 2000.

DOWNLOAD NOW »

Author: M.F. Hassan

Publisher: Elsevier

ISBN: 0080530141

Category: Technology & Engineering

Page: 664

View: 371

The International Conference on Mechanical Design and Production has over the years established itself as an excellent forum for the exchange of ideas in these established fields. The first of these conferences was held in 1979. The seventh, and most recent, conference in the series was held in Cairo during February 15-17, 2000. International engineers and scientists gathered to exchange experiences and highlight the state-of-the-art research in the fields of mechanical design and production. In addition a heavy emphasis was placed on the issue of technology transfer. Over 100 papers were accepted for presentation at the conference. Current Advances in Mechanical Design & Production VII does not, however, attempt to publish the complete work presented but instead offers a sample that represents the quality and breadth of both the work and the conference. Ten invited papers and 54 ordinary papers have been selected for inclusion in these proceedings. They cover a range of basic and applied topics that can be classified into six main categories: System Dynamics, Solid Mechanics, Material Science, Manufacturing Processes, Design and Tribology, and Industrial Engineering and its Applications.

Advances in Design Simulation and Manufacturing III

This book explores topics at the interface between mechanical and chemical engineering, with a focus on design, simulation, and manufacturing.

DOWNLOAD NOW »

Author: Vitalii Ivanov

Publisher: Springer Nature

ISBN: 9783030504915

Category: Technology & Engineering

Page: 407

View: 959

This book explores topics at the interface between mechanical and chemical engineering, with a focus on design, simulation, and manufacturing. Covering recent developments in the mechanics of solids and structures; numerical simulation of coupled problems, including wearing, compression, detonation and collision; and chemical process technologies, including ultrasonic technology, capillary rising process, pneumatic classification, membrane electrolysis and absorption processes, it reports on developments in the field of heat and mass transfer, energy-efficient technologies, and industrial ecology. Part of a two-volume set based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020, in Kharkiv, Ukraine, this book provides academics and professionals with extensive information on the latest trends, technologies and challenges in the field as well as practical lessons learned.

Recent Advances in Mechanical Engineering

This book presents the selected peer-reviewed papers from the National Conference on Advances in Mechanical Engineering (NCAME 2019), held at the National Institute of Technology Delhi, India.

DOWNLOAD NOW »

Author: Harish Kumar

Publisher: Springer Nature

ISBN: 9789811510717

Category: Science

Page: 653

View: 918

This book presents the selected peer-reviewed papers from the National Conference on Advances in Mechanical Engineering (NCAME 2019), held at the National Institute of Technology Delhi, India. The book covers different areas of mechanical engineering from design engineering to manufacturing engineering. A wide range of topics are discussed such as CAD/CAM, additive manufacturing, fluid dynamics, materials science and engineering, simulation and modeling, finite element analysis, applied mechanics to name a few. The contents provide an overview of the state-of-the-art in mechanical engineering research in the country. Given the scope of the topics covered, the book will be of interest for students, researchers and professionals working in mechanical engineering.

Advances in Integrated Design and Manufacturing in Mechanical Engineering

This book presents a selection of papers related to the fifth edition of book further to the International Conference on Integrated Design and Manufacturing in Mechanical Engineering.

DOWNLOAD NOW »

Author: Alan Bramley

Publisher: Springer Science & Business Media

ISBN: 9781402034824

Category: Technology & Engineering

Page: 432

View: 778

This book presents a selection of papers related to the fifth edition of book further to the International Conference on Integrated Design and Manufacturing in Mechanical Engineering. This Conference has been organized within the framework of the activities of the AIP-PRIMECA network whose main scientific field is Integrated Design applied to both Mechanical Engineering and Productics. This network isorganized along the lines of a joint project: the evolution, in the field of training of Integrated Design in Mechanics and Productics, in quite close connection with the ever changing industrial needs over the past 20 years. It is in charge of promoting both exchanges of experience and know-how capitalisation. It has a paramount mission to fulfil, be it in the field of initial and continuous education, technological transfer and knowledge dissemination through strong links with research labs. For the second time, in fact, the IDMME Conference has been held abroad and, after Canada in 2000, the United Kingdom, more particularly Bath University, has been retained under the responsibility of Professor Alan Bramley, the Chairman of the Scientific Committee of the conference. The Scientific Committee members have selected all the lectures from com mplete papers, which is the guarantee for the Conference of quite an outstanding scientific level. After that, a new selection hasbeen carried out to retain the best publications, which establish in a book, a state-of-the-art analysis as regards Integrated Design and Manufacturing in the discipline of Mechanical Engineering.

Research in Interactive Design Vol 4

Covering key topics in the field such as technological innovation, human-centered sustainable engineering and manufacturing, and manufacture at a global scale in a virtual world, this book addresses both advanced techniques and industrial ...

DOWNLOAD NOW »

Author: Xavier Fischer

Publisher: Springer

ISBN: 9783319261218

Category: Technology & Engineering

Page: 637

View: 415

Covering key topics in the field such as technological innovation, human-centered sustainable engineering and manufacturing, and manufacture at a global scale in a virtual world, this book addresses both advanced techniques and industrial applications of key research in interactive design and manufacturing. Featuring the full papers presented at the 2014 Joint Conference on Mechanical Design Engineering and Advanced Manufacturing, which took place in June 2014 in Toulouse, France, it presents recent research and industrial success stories related to implementing interactive design and manufacturing solutions.

Advances in Mechanical Engineering Materials and Mechanics

This book reports on cutting-edge research in the broad fields of mechanical engineering and mechanics.

DOWNLOAD NOW »

Author: Mohamed Kharrat

Publisher: Springer Nature

ISBN: 9783030520717

Category: Technology & Engineering

Page: 465

View: 811

This book reports on cutting-edge research in the broad fields of mechanical engineering and mechanics. It describes innovative applications and research findings in applied and fluid mechanics, design and manufacturing, thermal science and materials. A number of industrially relevant recent advances are also highlighted. All papers were carefully selected from contributions presented at the International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM2019, held on December 16–18, 2019, in Hammamet, Tunisia, and organized by the Laboratory of Electromechanical Systems (LASEM) at the National School of Engineers of Sfax (ENIS) and the Tunisian Scientific Society (TSS), in collaboration with a number of higher education and research institutions in and outside Tunisia.