Linear Static Analysis

DOWNLOAD NOW »

Author: William J. Anderson

Publisher:

ISBN: UOM:39015011737049

Category: Finite element method

Page:

View: 298

Non Linear Static and Cyclic Analysis of Steel Frames with Semi Rigid Connections

This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading.

DOWNLOAD NOW »

Author: Siu-Lai Chan

Publisher: Elsevier

ISBN: 0080537715

Category: Technology & Engineering

Page: 356

View: 902

This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.

Structural Analysis with the Finite Element Method Linear Statics

STRUCTURAL ANALYSIS WITH THE FINITE ELEMENT METHOD Linear Statics Volume 1 : The Basis and Solids Eugenio Oñate The two volumes of this book cover most of the theoretical and computational aspects of the linear static analysis of ...

DOWNLOAD NOW »

Author: Eugenio Oñate

Publisher: Springer Science & Business Media

ISBN: 9781402087332

Category: Technology & Engineering

Page: 446

View: 999

STRUCTURAL ANALYSIS WITH THE FINITE ELEMENT METHOD Linear Statics Volume 1 : The Basis and Solids Eugenio Oñate The two volumes of this book cover most of the theoretical and computational aspects of the linear static analysis of structures with the Finite Element Method (FEM). The content of the book is based on the lecture notes of a basic course on Structural Analysis with the FEM taught by the author at the Technical University of Catalonia (UPC) in Barcelona, Spain for the last 30 years. Volume1 presents the basis of the FEM for structural analysis and a detailed description of the finite element formulation for axially loaded bars, plane elasticity problems, axisymmetric solids and general three dimensional solids. Each chapter describes the background theory for each structural model considered, details of the finite element formulation and guidelines for the application to structural engineering problems. The book includes a chapter on miscellaneous topics such as treatment of inclined supports, elastic foundations, stress smoothing, error estimation and adaptive mesh refinement techniques, among others. The text concludes with a chapter on the mesh generation and visualization of FEM results. The book will be useful for students approaching the finite element analysis of structures for the first time, as well as for practising engineers interested in the details of the formulation and performance of the different finite elements for practical structural analysis. STRUCTURAL ANALYSIS WITH THE FINITE ELEMENT METHOD Linear Statics Volume 2: Beams, Plates and Shells Eugenio Oñate The two volumes of this book cover most of the theoretical and computational aspects of the linear static analysis of structures with the Finite Element Method (FEM).The content of the book is based on the lecture notes of a basic course on Structural Analysis with the FEM taught by the author at the Technical University of Catalonia (UPC) in Barcelona, Spain for the last 30 years. Volume 2 presents a detailed description of the finite element formulation for analysis of slender and thick beams, thin and thick plates, folded plate structures, axisymmetric shells, general curved shells, prismatic structures and three dimensional beams. Each chapter describes the background theory for each structural model considered, details of the finite element formulation and guidelines for the application to structural engineering problems Emphasis is put on the treatment of structures with layered composite materials. The book will be useful for students approaching the finite element analysis of beam, plate and shell structures for the first time, as well as for practising engineers interested in the details of the formulation and performance of the different finite elements for practical structural analysis.

The Finite Element Method

Designed for students without in-depth mathematical training, this text includes a comprehensive presentation and analysis of algorithms of time-dependent phenomena plus beam, plate, and shell theories.

DOWNLOAD NOW »

Author: Thomas J. R. Hughes

Publisher: Courier Corporation

ISBN: 9780486135021

Category: Technology & Engineering

Page: 704

View: 456

Designed for students without in-depth mathematical training, this text includes a comprehensive presentation and analysis of algorithms of time-dependent phenomena plus beam, plate, and shell theories. Solution guide available upon request.

Engineering Analysis with SolidWorks Simulation 2011

Engineering Analysis with SolidWorks Simulation 2011 goes beyond the standard software manual because its unique approach concurrently introduces you to the SolidWorks Simulation 2011 software and the fundamentals of Finite Element Analysis ...

DOWNLOAD NOW »

Author: Paul Kurowski

Publisher: SDC Publications

ISBN: 9781585036325

Category: Computers

Page: 456

View: 381

Engineering Analysis with SolidWorks Simulation 2011 goes beyond the standard software manual because its unique approach concurrently introduces you to the SolidWorks Simulation 2011 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SolidWorks Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. The following FEA functionality of SolidWorks Simulation 2011 is covered: Linear static analysis of parts and assemblies Contact stress analysis Frequency (modal) analysis Buckling analysis Thermal analysis Drop test analysis Nonlinear analysis Dynamic analysis h and p adaptive solution methods

Engineering Analysis with SOLIDWORKS Simulation 2019

Engineering Analysis with SOLIDWORKS Simulation 2019 goes beyond the standard software manual.

DOWNLOAD NOW »

Author: Paul Kurowski

Publisher: SDC Publications

ISBN: 9781630572372

Category: Computers

Page: 606

View: 113

Engineering Analysis with SOLIDWORKS Simulation 2019 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2019 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered Linear static analysis of parts and assembliesContact stress analysisFrequency (modal) analysisBuckling analysisThermal analysisDrop test analysisNonlinear analysisDynamic analysisRandom vibration analysish and p adaptive solution methodsModeling techniquesImplementation of FEA in the design processManagement of FEA projectsFEA terminology

Engineering Analysis with SOLIDWORKS Simulation 2021

Engineering Analysis with SOLIDWORKS Simulation 2021 goes beyond the standard software manual.

DOWNLOAD NOW »

Author: Paul Kurowski

Publisher: SDC Publications

ISBN: 9781630573836

Category: Computers

Page: 582

View: 264

Engineering Analysis with SOLIDWORKS Simulation 2021 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2021 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered • Linear static analysis of parts and assemblies • Contact stress analysis • Frequency (modal) analysis • Buckling analysis • Thermal analysis • Drop test analysis • Nonlinear analysis • Dynamic analysis • Random vibration analysis • h and p adaptive solution methods • Modeling techniques • Implementation of FEA in the design process • Management of FEA projects • FEA terminology

Engineering Analysis with SolidWorks Simulation 2012

Engineering Analysis with SolidWorks Simulation 2012 goes beyond the standard software manual.

DOWNLOAD NOW »

Author: Paul M. Kurowski

Publisher: SDC Publications

ISBN: 9781585037100

Category: Computers

Page: 456

View: 893

Engineering Analysis with SolidWorks Simulation 2012 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SolidWorks Simulation 2012 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SolidWorks Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered: Linear static analysis of parts and assemblies Contact stress analysis Frequency (modal) analysis Buckling analysis Thermal analysis Drop test analysis Nonlinear analysis Dynamic analysis Random vibration analysis h and p adaptive solution methods Modeling techniques Implementation of FEA in the design process Management of FEA projects FEA terminology

Engineering Analysis with SolidWorks Simulation 2010

Presents a guide to the features of SolidWorks Simulation software and the fundamentals of Finite Element Analysis along with providing a variety of hands-on exercises.

DOWNLOAD NOW »

Author: Paul M. Kurowski

Publisher: SDC Publications

ISBN: 9781585035762

Category: Computers

Page: 401

View: 480

Presents a guide to the features of SolidWorks Simulation software and the fundamentals of Finite Element Analysis along with providing a variety of hands-on exercises.

Reanalysis of Structures

This book deals with various computational procedures for multiple repeated analyses (reanalysis) of structures, and presents them in a unified approach.

DOWNLOAD NOW »

Author: Uri Kirsch

Publisher: Springer Science & Business Media

ISBN: 1402081987

Category: Computers

Page: 308

View: 748

This book deals with various computational procedures for multiple repeated analyses (reanalysis) of structures, and presents them in a unified approach. It meets the need for a general text covering the basic concepts and methods as well as recent developments in this area. To clarify the presentation, many illustrative examples and numerical results are demonstrated. Previous books on structural analysis do not cover most of the material presented here.

Introduction to Static Analysis Using SolidWorks Simulation

2.3.1 Main Features of Linear Static Analysis Finally, we have an idea about the
object of our analysis; in fact, we even have the CAD model of our prototype and
it seems that we are ready to start. But before proceeding with the analysis, we ...

DOWNLOAD NOW »

Author: Radostina V. Petrova

Publisher: CRC Press

ISBN: 9781482236194

Category: Science

Page: 353

View: 319

Uses Finite Element Analysis (FEA) as Implemented in SolidWorks Simulation Outlining a path that readers can follow to ensure a static analysis that is both accurate and sound, Introduction to Static Analysis using SolidWorks Simulation effectively applies one of the most widely used software packages for engineering design to the concepts of static analysis. This text utilizes a step-by-step approach to introduce the use of a finite element simulation within a computer-aided design (CAD) tool environment. It does not center on formulae and the theory of FEM; in fact, it contains essentially no theory on FEM other than practical guidelines. The book is self-contained and enables the reader to progress independently without an instructor. It is a valuable guide for students, educators, and practicing professionals who wish to forego commercial training programs, but need to refresh or improve their knowledge of the subject. Classroom Tested with Figures, Examples, and Homework Problems The book contains more than 300 illustrations and extensive explanatory notes covering the features of the SolidWorks (SW) Simulation software. The author presents commonly used examples and techniques highlighting the close interaction between CAD modelling and FE analysis. She describes the stages and program demands used during static analysis, details different cases, and explores the impact of selected options on the final result. In addition, the book includes hands-on exercises, program commands, and a summary after each chapter. Explores the static studies of simple bodies to more complex structures Considers different types of loads and how to start the loads property managers Studies the workflow of the run analysis and discusses how to assess the feedback provided by the study manager Covers the generation of graphs Determines how to assess the quality of the created mesh based on the final results and how to improve the accuracy of the results by changing the mesh properties Examines a machine unit with planar symmetrical geometry or with circular geometry exposed to symmetrical boundary conditions Compares 3D FEA to 2D FEA Discusses the impact of the adopted calculating formulation by comparing thin-plate results to thick-plate results Introduction to Static Analysis using SolidWorks Simulation equips students, educators, and practicing professionals with an in-depth understanding of the features of SW Simulation applicable to static analysis (FEA/FEM).

Engineering Analysis with SolidWorks Simulation 2013

Engineering Analysis with SolidWorks Simulation 2013 goes beyond the standard software manual.

DOWNLOAD NOW »

Author: Paul Kurowski

Publisher: SDC Publications

ISBN: 9781585037841

Category: Computers

Page: 488

View: 787

Engineering Analysis with SolidWorks Simulation 2013 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SolidWorks Simulation 2013 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SolidWorks Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered: Linear static analysis of parts and assemblies Contact stress analysis Frequency (modal) analysis Buckling analysis Thermal analysis Drop test analysis Nonlinear analysis Dynamic analysis Random vibration analysis h and p adaptive solution methods Modeling techniques Implementation of FEA in the design process Management of FEA projects FEA terminology

Engineering Analysis with SolidWorks Simulation 2014

Engineering Analysis with SolidWorks Simulation 2014 goes beyond the standard software manual.

DOWNLOAD NOW »

Author: Paul Kurowski

Publisher: SDC Publications

ISBN: 9781585038589

Category: Computers

Page: 491

View: 468

Engineering Analysis with SolidWorks Simulation 2014 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SolidWorks Simulation 2014 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SolidWorks Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered: Linear static analysis of parts and assemblies Contact stress analysis Frequency (modal) analysis Buckling analysis Thermal analysis Drop test analysis Nonlinear analysis Dynamic analysis Random vibration analysis h and p adaptive solution methods Modeling techniques Implementation of FEA in the design process Management of FEA projects FEA terminology